Contemporary Island Range Hoods
CILH9 - Contemporary
This island range hood offers a multi-layered visual effect and the stainless steel galley rail is standard on this model. Not available in brass or copper overlay.
Vent-A-Hood can fabricate custom dimensions to 1/8" tolerances. Standard hood widths range from 42" to 66", in 6" increments, with custom widths available up to 120". The hood is 9" tall with optional, standard duct covers (shown) available to reach 7', 8' and 9' ceilings. Custom height duct covers are also available. The hood depth is 30".
Model Number Breakdown
Ex: CILH9-242 SS
- CIL
- Contemporary Style
- H
- Halogen lighting.
- Fluorescent lighting is N/A.
- 9
- Hood is 9" tall.
- -
- 2*
- T200, 600 CFM blower.
- 42
- Hood is 42" wide.
- SS**
- Hood finish. SS = St. Steel.
Other model number examples might be: CILH9-254 BL or CILH9-2+260 WH, where BL = black and WH = white.
* A "2" here indicates one 600 CFM, dual blower (900 equivalent CFM).
* A "2+2" here indicates two 600 CFM, dual blowers (1200 CFM total = 1800 equivalent CFM).
What does Equivalent CFM mean?
CFM ratings, for hoods using mesh or baffle filters, are overstated by approximately 1/3 because they are tested without the filters in place. A mesh or baffle filtered hood, rated at 450 CFM, actually delivers only about 300 CFM of airflow after the filters are placed in the air stream.
Because it uses a centrifugal filtration system with nothing to obstruct the airflow, the Vent-A-Hood Magic Lung® blower is much more efficient, delivering airflow equivalent to a "filtered" hood - but with a lower CFM rating. When comparing the Magic Lung® to blower units made by other manufacturers, use the "Equivalent CFM".
** In addition to stainless steel, Vent-A-Hood is also available in standard painted finishes plus dozens of custom paint colors. Copper and brass overlay are not available for this model. Click here to view the available custom paint colors: www.tigerdrylac.com/fileadmin/usa/Template/pdf/ralcolorchart.pdf.
