Ventahood

Euro-Style Island Range Hoods

Vent-A-Hood Main | Under Cabinet | Wall Mount | Island | Liners/Blowers

Other Island Euro-Styles

For standard cooking equipment
ISD18
PYD18
For standard or professional-style cooking equipment
EPI18
EPIT18
SEPI18
SEPIT18

Back to Section Navigation

All Vent-A-Hood products are suitable for use in damp locations (such as an outdoor covered patio), when installed in a GFCI protected branch circuit.

Once you have decided on a basic range hood style, you can customize your hood with these available options (see your local Vent-A-Hood dealer for details):

  • Bands - horizontal or vertical
  • Pot Rails (standard on some models)
  • Custom finishes (see ** below)
EPITH18/EPITF18 - Euroline Pro

EPITH18/EPITF18 - Euroline Pro

The Euroline Pro Series is boldly designed to handle any professional-style cooking equipment.

Vent-A-Hood can fabricate custom dimensions to 1/8" tolerances. Standard hood widths are 48", 54", 60" and 66" with custom widths available up to 120". This hood is 18" tall with optional, standard duct covers (shown) available to reach 8', 9' and 10' ceilings. Custom height duct covers are also available. The hood depth is 30".

View Technical Specifications

Model Number Breakdown
Ex: EPITH18-448 SS

What makes Vent-A-Hood so special?

EPIT
Euroline Style with Emerald Lip.
H
Halogen lighting.
F = fluorescent lighting.
18
Hood is 18" tall.
-
4*
(1) T400, 1200 CFM "cluster" blower.
48
Hood is 48" wide.
SS**
Hood finish. SS = St. Steel.

Other model number examples might be: EPITH18-454BL or EPITF18-466 WH, where BL = black and WH = white.

A "4"* A "4" here indicates one 1200 CFM, "cluster" blower (1800 equivalent CFM).

What does Equivalent CFM mean?

CFM ratings, for hoods using mesh or baffle filters, are overstated by approximately 1/3 because they are tested without the filters in place. A mesh or baffle filtered hood, rated at 450 CFM, actually delivers only about 300 CFM of airflow after the filters are placed in the air stream.

Because it uses a centrifugal filtration system with nothing to obstruct the airflow, the Vent-A-Hood Magic Lung® blower is much more efficient, delivering airflow equivalent to a "filtered" hood - but with a lower CFM rating. When comparing the Magic Lung® to blower units made by other manufacturers, use the "Equivalent CFM".

** In addition to stainless steel, Vent-A-Hood is also available in standard painted finishes, dozens of custom paint colors as well as real brass (smooth) and real copper (smooth or hammered finish). Click here to view the available custom paint colors: www.tigerdrylac.com/fileadmin/usa/Template/pdf/ralcolorchart.pdf.