Ventahood

Contemporary Island Range Hoods

Vent-A-Hood Main | Under Cabinet | Wall Mount | Island | Liners/Blowers

Other Contemporary Island Styles

For standard or professional-style cooking equipment
CILH9
IZTH

Back to Section Navigation

All Vent-A-Hood products are suitable for use in damp locations (such as an outdoor covered patio), when installed in a GFCI protected branch circuit.

Once you have decided on a basic range hood style, you can customize your hood with these available options (see your local Vent-A-Hood dealer for details):

  • Bands - horizontal or vertical
  • Pot Rails (standard on some models)
  • Custom finishes (see ** below)
IZTH - Contemporary

IZTH - Contemporary

This island range hood with glass accents is designed for use over any standard or professional-style cooking equipment. The fixed length stainless steel rails are standard on this model.

This model is available only in st. steel, in 42", 48", 54", 60" and 66" widths. The hood is 14" tall with optional, standard duct covers (shown) available to reach 7', 8' and 9' ceilings. Custom height duct covers are also available. The hood depth is 30".

View Technical Specifications

Model Number Breakdown
Ex: IZTH-242

What makes Vent-A-Hood so special?

IZT
Contemporary Style
H
Halogen lighting. Fluorescent lighting is N/A.
-
2*
T200, 600 CFM blower.
42
Hood is 42" wide.

Other model number examples might be: IZTH-248 SS or IZTH-460 SS. This model is available is St. Steel only.

A "2"* A "2" here indicates one 600 CFM, dual blower (900 equivalent CFM).

A "4"* A "4" here indicates one 1200 CFM, "cluster" blower (1800 equivalent CFM).

What does Equivalent CFM mean?

CFM ratings, for hoods using mesh or baffle filters, are overstated by approximately 1/3 because they are tested without the filters in place. A mesh or baffle filtered hood, rated at 450 CFM, actually delivers only about 300 CFM of airflow after the filters are placed in the air stream.

Because it uses a centrifugal filtration system with nothing to obstruct the airflow, the Vent-A-Hood Magic Lung® blower is much more efficient, delivering airflow equivalent to a "filtered" hood - but with a lower CFM rating. When comparing the Magic Lung® to blower units made by other manufacturers, use the "Equivalent CFM".

** In addition to stainless steel, Vent-A-Hood is also available in standard painted finishes plus dozens of custom paint colors. Copper and brass overlay are not available for this model. Click here to view the available custom paint colors: www.tigerdrylac.com/fileadmin/usa/Template/pdf/ralcolorchart.pdf.