Liners/Blowers for Wood Hoods
and Tilt-Out Hood
TLH - Tilt-Out Hood
When your kitchen range hood isn't being used, simply push it in and it disappears, blending with the rest of your cabinetry. Pull it out, and it offers you a high-performance ventilation system covering the entire cooking surface.
Shown with wood front - supplied by others.
This hidden canopy, fronted with your own cabinet material provides visual continuity of cabinetry. Easy to pull out and close, this model successfully blends into cabinets. This hood is available with halogen lighting only.
All Vent-A-Hood products are suitable for use in damp locations (such as an outdoor covered patio) when installed in a GFCI protected branch circuit.
Standard hood widths range from 30" to 48" in 6" increments. Custom widths are available between those dimensions with a maximum width of 48". Height (36" max.) and depth may also be customized. Use with standard, residential cooking equipment.
Model Number Breakdown
Ex: TLH-242 SS
- TLH
- Tilt-Out Style.
- Halogen lighting only.
- -
- 2*
- Dual, 300/600 CFM blower.
- 42
- Hood is 42" wide.
- SS**
- Hood finish.
SS = St. Steel.
Other model number examples might be: TLH-136 BL or TLH-230 WH, where BL = black and WH = white.
* A "1" here indicates a 300 CFM, single blower (450 equivalent CFM).
* A "2" here indicates a 300/600 CFM, dual blower (900 equivalent CFM).
What does Equivalent CFM mean?
CFM ratings, for hoods using mesh or baffle filters, are overstated by approximately 1/3 because they are tested without the filters in place. A mesh or baffle filtered hood, rated at 450 CFM, actually delivers only about 300 CFM of airflow after the filters are placed in the air stream.
Because it uses a centrifugal filtration system with nothing to obstruct the airflow, the Vent-A-Hood Magic Lung® blower is much more efficient, delivering airflow equivalent to a "filtered" hood - but with a lower CFM rating. When comparing the Magic Lung® to blower units made by other manufacturers, use the "Equivalent CFM".
** In addition to stainless steel, Vent-A-Hood is also available in standard painted finishes plus dozens of custom paint colors. Copper and brass overlay are not available for this model. Click here to view the available custom paint colors: www.tigerdrylac.com/fileadmin/usa/Template/pdf/ralcolorchart.pdf.
