Standard Wall Mount Liners/Blowers for Wood Hoods
BHPSLB/BFPSLB
Vent-A-Hood one-piece liners are pre-wired, pre-assembled, ready-to-install and consist of canopy, blower, lighting and switches. Standard liner dimensions cannot be changed. For alternate dimensions, use custom liner model BLB.
Model Number Breakdown
Ex: BH340PSLB SS
- B
- Wall Mount
- H
- Halogen lighting.
- F = fluorescent lighting.
- 3*
- (1) Single,
300 CFM and
(1) 300/600
CFM dual
blower.
- 40
- Hood is 40-3/8" wide.
- PSLB
- Professional standard liner model.
- SS**
- Liner finish.
SS = St. Steel.
Other model number examples might be: BH446PSLB BL or BF446PSLB WH, where BL = black and WH = white.
* A "3" here indicates one 300 CFM single blower and one 300/600 CFM dual blower (900 CFM total = 1350 equivalent CFM).
* A "4" here indicates two 300/600 CFM dual blowers (1200 CFM total = 1800 equivalent CFM).
What does Equivalent CFM mean?
CFM ratings, for hoods using mesh or baffle filters, are overstated by approximately 1/3 because they are tested without the filters in place. A mesh or baffle filtered hood, rated at 450 CFM, actually delivers only about 300 CFM of airflow after the filters are placed in the air stream.
Because it uses a centrifugal filtration system with nothing to obstruct the airflow, the Vent-A-Hood Magic Lung® blower is much more efficient, delivering airflow equivalent to a "filtered" hood - but with a lower CFM rating. When comparing the Magic Lung® to blower units made by other manufacturers, use the "Equivalent CFM".
** In addition to stainless steel, Vent-A-Hood is also available in standard painted finishes plus dozens of custom paint colors. Copper and brass overlay are not available for this model. Click here to view the available custom paint colors: www.tigerdrylac.com/fileadmin/usa/Template/pdf/ralcolorchart.pdf.
