Ventahood

Standard Wall Mount Range Hoods

Vent-A-Hood Main | Under Cabinet | Wall Mount | Island | Liners/Blowers

Other Wall Mount Standard Styles

All Vent-A-Hood products are suitable for use in damp locations (such as an outdoor covered patio), when installed in a GFCI protected branch circuit.

Once you have decided on a basic range hood style, you can customize your hood with these available options (see your local Vent-A-Hood dealer for details):

  • Heat lamps (selected models)
  • Bands - horizontal or vertical
  • Warming Shelf Assembly
  • Pot Rails (standard on some models)
  • Custom finishes (see ** below)
PWVH30/PWVF30 - Slopeline

PWVH30/PWVF30 - Slopeline

The clean slope and defined front lip create a traditional wall mount design that can have either vertical or sloped ends for between-cabinet and free-standing installations.

Vent-A-Hood can fabricate custom dimensions to 1/8" tolerances. Standard hood widths range from 30" to 66", in 6" increments, with custom widths available from 21" to 120". The standard hood height is 30" with custom heights available (minimum 9"). The standard depth is 24".

View Technical Specifications

Model Number Breakdown
Ex: PWVH30-242 SS

What makes Vent-A-Hood so special?

PWV
Slopeline Style
H
Halogen lighting.
F = fluorescent lighting.
30
Hood is 30" tall.
-
2*
Dual, 300/600 CFM blower.
42
Hood is 42" wide.
SS**
Hood finish. SS = St. Steel.

Other model number examples might be: PWVH30-130 BL or PWVF30-354 WH, where BL = black and WH = white.

A "1"* A "1" here indicates a 300 CFM, single blower (450 equivalent CFM).

A "2"* A "2" here indicates a 300/600 CFM, dual blower (900 equivalent CFM).

A "3"* A "3" here indicates one 300 CFM single blower and one 300/600 CFM dual blower (900 CFM total = 1350 equivalent CFM).

A "4"* A "4" here indicates two 300/600 CFM dual blowers (1200 CFM total = 1800 equivalent CFM).

What does Equivalent CFM mean?

CFM ratings, for hoods using mesh or baffle filters, are overstated by approximately 1/3 because they are tested without the filters in place. A mesh or baffle filtered hood, rated at 450 CFM, actually delivers only about 300 CFM of airflow after the filters are placed in the air stream.

Because it uses a centrifugal filtration system with nothing to obstruct the airflow, the Vent-A-Hood Magic Lung® blower is much more efficient, delivering airflow equivalent to a "filtered" hood - but with a lower CFM rating. When comparing the Magic Lung® to blower units made by other manufacturers, use the "Equivalent CFM".

** In addition to stainless steel, Vent-A-Hood is also available in standard painted finishes, dozens of custom paint colors as well as real brass (smooth) and real copper (smooth or hammered finish). Click here to view the available custom paint colors: www.tigerdrylac.com/fileadmin/usa/Template/pdf/ralcolorchart.pdf.